Liquitex Basics Gloss Varnish – 250ml

GLOSS VARNISH – 250ml

Protect and seal your acrylic work with a transparent, gloss layer which is breathable, permanent and protects against UV damage.

WHAT IT DOES

• Adds a gloss sheen, protects and stops dirt build up
• Dries clear to a flexible, non-tacky, hard surface
• Increases brightness and color saturation
• Improves surface durability – ideal when shipping or exhibiting
• Protects colors from UV light damage
• Resists discoloration – yellowing and fogging – caused by humidity, heat and UV
• Use on flexible or rigid supports
• Designed for interior and exterior use

HOW TO USE IT

• Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
• Ensure your space is well ventilated and dirt and dust-free
• Place the artwork flat on a surface – always varnish horizontally
• Use a large, soft brush
• Stir gently before use
• Use long, even strokes, covering the surface top to bottom while moving from one side to the other – don’t go over bits you have missed but leave to dry and then re-varnish area
• While applying, look for surface bubbles by inspecting it from all angles and even them out immediately
• Apply up to three thin coats, allowing at least three hours dry time between coats

HOW NOT TO USE IT

• Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry
• Don’t apply with a roller or sponge brush
• Don’t apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
• Don’t go back over areas you have already done, as this can cause clouding
• Don’t attempt to remove once applied
• Do not use with any non-acrylic media